800psi or 1000psi Seawater RO Membrane 4040 for Reverse Osmosis Sea Water Desalination

Product Details
Customization: Available
Membrane Type: Spiral
Type: RO
Gold Member Since 2021

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

to see all verified strength labels (19)
  • 800psi or 1000psi Seawater RO Membrane 4040 for Reverse Osmosis Sea Water Desalination
Find Similar Products

Basic Info.

Model NO.
8040FR
Industry
Water Treatment
Colour
White
Weight
3.38kg
Transport Package
Carton
Specification
8040FR
Trademark
FROTEC
Origin
China
HS Code
8421999090
Production Capacity
5000PCS\Month

Product Description

FROTEC 8040FR / 4040FR fouling-resistant membrane



FROTEC 8040FR / 4040FR elements can separate salts from water and increase permeability while offering superior salt rejection. They are ideal for use in large-scale industrial and municipal water treatment systems.

FROTEC 8040FR / 4040FR elements can lower the cost of desalination by improving energy efficiency and productivity significantly.

 

Suitable for:


new-built or existing RO systems.
challenging feed water with low quality.
various operating conditions with 4″and 8″elements.


Product Specifications


 
ModelActive Membrane Area
ft2(m2)
Stabilized Salt Rejection
%
Minimum Salt Rejection
%
Permeate Flow
Rate gpd(m3/d)
8040FR400(37)99.599.010,500(40)
4040FR78(7.2)99.599.02,050(7.8)

Test Condition: Feed Water Pressure 1.55MPa (225 psi); Feed Water Temperature 25 °C (77 °F); Feed Water Concentration 2,000 ppm NaCl; Feed Water pH 7; Permeate Recovery 15%.
 

 

Dimensions


 
ModelA inch(mm)B inch(mm)C inch(mm)D inch(mm)
8040FR40(1,016)01.125(29)7.9(201)
4040FR40(1,016)1.05(26.7)0.75(19)3.9(99)


Operation Condition
Maximum Operating Pressure 41 bar(600 psi) Maximum Operating Temperature 45ºC(113ºF)
Maximum Pressure Drop per Element 1.0 bar (15 psi)
pH Range, Continuous Operation 2-11 pH Range, Chemical Cleaning 1-13
Maximum Feed Silt Density Index (SDI15) 5.0 Free Chlorine Tolerance < 0.1 ppm

 

Note

1. Permeate flow rates for individual elements may vary ±15%. 2, Membrane active areas may vary ±4%.
3. Stabilized salt rejection is generally achieved after continuous using for 24-48 hours, which depending on feed water qualities and operating conditions.



Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier