UF Filter Membrane Used for Industrial UF Plant UF8040/8060 (PP) -I

• Customization: Available
• Membrane Type: Hollow
• Type: UF
• Model NO.: UF8040/8060
• Size: UF5040(PP)-I
• Colour: White
• Warranty: 12 Months
• Brand: Frotec or Customized
• Transport Package: Carton
• Specification: UF5040(PP)-I
• Trademark: FROTEC
• Origin: China
• HS Code: 8421999090
• Production Capacity: 5000PCS\Month

Product Description

Hollow Fiber Membrane UF Module

1. Tech Data of Membrane Materials

Type: UF5040(PP)-I

 

4. Reference

No

Notice

1 If the membrane have be treated with hydrophilic property in dry condition, there will be

activated-agent on the membrane. Please clean the membrane by water to remove the

possible chemical agent for 30mins. The activated agent is harmless for health.

2 If the membrane have be treated with hydrophilic property in wet condition, there will

be protective water in the module. Maybe disinfection Chemical agent will be used.

Please clean the membrane by water to remove the possible chemicals for 10 mins.

3 The PP membrane have excellent properties to resist the chemicals of acid, alkaline

(HCl or NaOH) and others, but not strong enough in high concentration oxidiztive

chemicals (NaClO). Please do not keep the membrane in such chemical for long time.

4 During the cross-flow and filtration, the bigger flowrate can increase the filtration and

resist the fouling of the membrane.

5 The temperature will greatly influence the UF filtration, the effluent rate will be

decreased with the lower temperature.

6 During the chemical washing, you can submerged the membrane in the chemicals or

cycle the chemicals in the module for hours.

7 After the membrane has been used, please keep the membrane in wet condition all the

time. If the membrane become dry, the filtration ability will be lost.

6. Connection mode of the UF module

The UF module is outside-to-inside filtration one. There will be an "arrow" stick in the casing

of modules. On the counter side of the arrow direction, it is feed-in port. On the arrow direction,

the center port is "concentration" port, and the side port is "clean water" out port.

Hear we list two flushing ways:

The back-flushing: The flushing water will be pumped from the "clean water" out-port to the

"feed-in" port. The effluent rate can be recovered greatly. But the flushing water must be clean

water or UF water.

The UF modules can be installed in horizontal direction or vertical direction.
 

Two or more UF modules can be used together to get more capacity of filtration. If the flushing

and air/water flushing can be done automatically, the UF modules can be keep a better filtration

for a long time.

FROTEC ULTRA FILTRATION MEMBRANE

   Ultra-filtration is an advanced technology to separate, purify and concentrate substance . It presents hollow capillary tube shape or hollow fiber shape, micro-pore covers tube wall densely. Feed liquid is flowing in or out the membrane under the influence of pressure, dissolvent or small molecule can permeate membrane and become pure liquid by collection, while large molecule (such as  protein, each kind of enzyme, nucleic acid, polysaccharide and so on) ,colloid particle (such as emulsion, micro-ion) and bacterium are cut off by the membrane and are taken off by the circulating liquid flow to become concentrating liquid.
FROTEC ULTRA FILTRATION MEMBRANE 4040
 

Product Code	Module Type	A (mm)	B (mm)	C (mm)	L1(mm)
UF-4040	UF-4040	101	19	27	1016

FROTEC ULTRA FILTRATION MEMBRANE 4046

 

Product Code	Module Type	A (mm)	B (mm)	C (mm)	L1(mm)	L2(mm)
UF-4046	UF-4046	169	113	112.5	965	1155

FROTEC ULTRA FILTRATION MEMBRANE 6060
 

Product Code	Module Type	A (mm)	B (mm)	C (mm)	L1(mm)	L2(mm)
UF-6060	UF-6060	195	160	160	1132	1352

FROTEC ULTRA FILTRATION MEMBRANE 8060
 

Product Code	Module Type	A (mm)	B (mm)	C (mm)	L1(mm)	L2(mm)
UF-8060	UF-8060	320	237	183.5	1020	1415

FROTEC ULTRA FILTRATION MEMBRANE 1060
 

Product Code	Module Type	A (mm)	B (mm)	C (mm)	L1(mm)	L2(mm)
UF-1060	UF-1060	323	303	173	1600	1713

Ultrafiltration membrane module parameters

Module	UF-4040	UF-4046	UF-6060	UF-8060	UF-1060
Module type	Inside-out	Inside-out	Inside-out	Inside-out	Inside-out
Shell  and seal materials	PVC,epoxy resins	PVC,epoxy resins	PVC,epoxy resins	PVC,epoxy resins	PVC,epoxy resins
Membrane Material	PAN/PVC	PAN/PVC	PAN/PVC	PAN/PVC	PAN/PVC
Molecular Weight Cut off(Dalton)	50.000	50.000	100.000	100.000	100.000
Size (mm)	Ø90×1016	Ø90×1155	Ø160×1352	Ø200×1415	Ø250×1713
Effective membrane  area	4m2	4.8m2	15m2	25m2	52m2
Hollow fiber id/od size	1.0mm/1.6mm	1.0mm/1.6mm	1.0mm/1.6mm	1.0mm/1.6mm	1.0mm/1.6mm
Max operating pressure	0.3Mpa	0.3Mpa	0.3Mpa	0.3Mpa	0.3Mpa
Suggest operating pressure	<0.2Mpa	<0.2Mpa	<0.2Mpa	<0.2Mpa	<0.2Mpa
Max transmembrane pressure	<0.2Mpa	<0.2Mpa	<0.2Mpa	<0.2Mpa	<0.2Mpa
Backwash pressure	0.05-0.1Mpa	0.05-0.1Mpa	0.05-0.1Mpa	0.05-0.1Mpa	0.05-0.1Mpa
Produced water pollution index( SDI 25)	<3	<3	<1	<3	<3
Initial flux	0.8m3/h	1.0m3/h	4.5m3/h	5m3/h	9m3/h
Design flux	40-150L/m2/h	40-150L/m2/h	40-150L/m2/h	40-150L/m2/h	40-150L/m2/h
Operating mode	Cross flow or dead-end flow	Cross flow or dead-end flow	Cross flow or dead-end flow	Cross flow or dead-end flow	Cross flow or dead-end flow
Bacteria removal rate	>4log	>4log	>6log	>6log	>6log
Permeate turbidity	<0.1NTU	<0.1NTU	<0.1NTU	<0.1NTU	<0.1NTU
Operating temperature	5~40ºC	5~40ºC	5~40ºC	5~40ºC	5~40ºC
PH range	2~10	2~10	2~10	2~10	2~10

FROTEC ULTRA FILTRATION MEMBRANE 2860  2880


UF2860 UF 2880 are an Ultra Filtration membrane module made by PVDF material hollow fiber tubes, and cover is PVC shell. These UF membranes are characterized by Antibacterial function.(especially good for removing particulate, virus_, colloid, albumin protein, gelatin, carbon black, organic compound.......)


 

UF2880	Filtration Type	Outside-In
	Max. Working Pressure (@ 20ºC)	94 psi (0.62MPa / 6.25bar)
	Suggested Working Pressure	43 psi (0.3MPa / 3bar)
	Backwash pressure(suggested)	36 psi (0.25Mpa /2.5bar )
	Air Flush Rate(Duration 2~4mins)(suggested)	7~9 acfm (12~15m^3/h)
	Max. Trans-Membrane Pressure Drop(TMP)	30 psi (0.2MPa / 2bar)
	Feed Water Temperature	1~40ºC
	Active Membrane Area	77 m^2(829ft^2)
	Filtrate Water Flow Range	13~40 GPM (3~9M^3PH)
	Molecular Weight Cut-Off /MWCO/(average porosity/pore Ø)	100,000 Dalton (0.01µm~0.1 µm)
	Hollow Fiber Tubes In/Out Diameter	0.6/1.2mm
	pH Range of Feed Water During Continuous Operation	2~11
	Operation Mode	Cross flow/Dead-end flow
	Max Feed Water Turbidity	< 300 NTU
	Product Water Turbidity	<0. 1 NTU
	Feed Water Particle size (max.)	< 300 µ
	Feed Water SDI15	< 25
	Product Water SDI15	< 2.5
	Product water average flow in system(Suggested)	Approximately 3M^3PH

UUF2860	Filtration Type	Outside-In
	Max. Working Pressure (@ 20ºC)	94 psi (0.62MPa / 6.25bar)
	Suggested Working Pressure	43 psi (0.3MPa / 3bar)
	Backwash pressure(suggested)	36 psi (0.25Mpa /2.5bar )
	Air Flush Rate(Duration 2~4mins)(suggested)	7~9 acfm (12~15m^3/h)
	Max. Trans-Membrane Pressure Drop(TMP)	30 psi (0.2MPa / 2bar)
	Feed Water Temperature	1~40ºC
	Active Membrane Area	55 m^2(592ft^2)
	Filtrate Water Flow Range	9~27 GPM (2~6M^3PH)
	Molecular Weight Cut-Off /MWCO/(average porosity/pore Ø)	100,000 Dalton (0.01µm~0.1 µm)
	Hollow Fiber Tubes In/Out Diameter	0.6/1.2mm
	pH Range of Feed Water During Continuous Operation	2~11
	Operation Mode	Cross flow/Dead-end flow
	Max Feed Water Turbidity	< 300 NTU
	Product Water Turbidity	<0. 1 NTU
	Feed Water Particle size (max.)	< 300 µ
	Feed Water SDI15	< 25
	Product Water SDI15	< 2.5
	Product water average flow in system(Suggested)	Approximately 2.5M^3PH

 

MODEL	L	L1	L2	L3	D	In/out Ø
UF2860	1860 mm (73'')	1500 mm (59'')	1630mm (64'')	1820 mm (72'')	225mm (9'')	DN50 mm (2'')
UF2880	2360 mm (93'')	2000 mm (79'')	2130mm (84'')	2320 mm (91'')	225mm (9'')	DN50 mm (2'')