Basic Info.
Salt Rejection Rate
99.0%
Active Membrane Area
4m2,4.8m2,15m2,25m2,52m2
Filtration Type
Outside-in
Backwash Pressure
0.05-0.1MPa
Permeate Flow Rate Gpd
2,050(7.8)/ 10,500(40)
Initial Flux
0.8m3/H,1.0m3/H,4.5m3/H,5m3/H,9m3/H
Operation Mode
Cross Flow/Dead-End Flow
Feed Water Particle Size (Max.)
< 300
Specification
118*13*13 113cm*22cm*22cm
Product Description
FROTEC ULTRA FILTRATION MEMBRANE
Ultra-filtration is an advanced technology to separate, purify and concentrate substance . It presents hollow capillary tube shape or hollow fiber shape, micro-pore covers tube wall densely. Feed liquid is flowing in or out the membrane under the influence of pressure, dissolvent or small molecule can permeate membrane and become pure liquid by collection, while large molecule (such as protein, each kind of enzyme, nucleic acid, polysaccharide and so on) ,colloid particle (such as emulsion, micro-ion) and bacterium are cut off by the membrane and are taken off by the circulating liquid flow to become concentrating liquid.
FROTEC ULTRA FILTRATION MEMBRANE 4040
Product Code | Module Type | A (mm) | B (mm) | C (mm) | L1(mm) |
UF-4040 | UF-4040 | 101 | 19 | 27 | 1016 |
FROTEC ULTRA FILTRATION MEMBRANE 4046 Product Code | Module Type | A (mm) | B (mm) | C (mm) | L1(mm) | L2(mm) |
UF-4046 | UF-4046 | 169 | 113 | 112.5 | 965 | 1155 |
FROTEC ULTRA FILTRATION MEMBRANE 6060 Product Code | Module Type | A (mm) | B (mm) | C (mm) | L1(mm) | L2(mm) |
UF-6060 | UF-6060 | 195 | 160 | 160 | 1132 | 1352 |
FROTEC ULTRA FILTRATION MEMBRANE 8060 Product Code | Module Type | A (mm) | B (mm) | C (mm) | L1(mm) | L2(mm) |
UF-8060 | UF-8060 | 320 | 237 | 183.5 | 1020 | 1415 |
FROTEC ULTRA FILTRATION MEMBRANE 1060 Product Code | Module Type | A (mm) | B (mm) | C (mm) | L1(mm) | L2(mm) |
UF-1060 | UF-1060 | 323 | 303 | 173 | 1600 | 1713 |
Ultrafiltration membrane module parameters Module | UF-4040 | UF-4046 | UF-6060 | UF-8060 | UF-1060 |
Module type | Inside-out | Inside-out | Inside-out | Inside-out | Inside-out |
Shell and seal materials | PVC,epoxy resins | PVC,epoxy resins | PVC,epoxy resins | PVC,epoxy resins | PVC,epoxy resins |
Membrane Material | PAN/PVC | PAN/PVC | PAN/PVC | PAN/PVC | PAN/PVC |
Molecular Weight Cut off(Dalton) | 50.000 | 50.000 | 100.000 | 100.000 | 100.000 |
Size (mm) | Ø90×1016 | Ø90×1155 | Ø160×1352 | Ø200×1415 | Ø250×1713 |
Effective membrane area | 4m2 | 4.8m2 | 15m2 | 25m2 | 52m2 |
Hollow fiber id/od size | 1.0mm/1.6mm | 1.0mm/1.6mm | 1.0mm/1.6mm | 1.0mm/1.6mm | 1.0mm/1.6mm |
Max operating pressure | 0.3Mpa | 0.3Mpa | 0.3Mpa | 0.3Mpa | 0.3Mpa |
Suggest operating pressure | <0.2Mpa | <0.2Mpa | <0.2Mpa | <0.2Mpa | <0.2Mpa |
Max transmembrane pressure | <0.2Mpa | <0.2Mpa | <0.2Mpa | <0.2Mpa | <0.2Mpa |
Backwash pressure | 0.05-0.1Mpa | 0.05-0.1Mpa | 0.05-0.1Mpa | 0.05-0.1Mpa | 0.05-0.1Mpa |
Produced water pollution index( SDI 25) | <3 | <3 | <1 | <3 | <3 |
Initial flux | 0.8m3/h | 1.0m3/h | 4.5m3/h | 5m3/h | 9m3/h |
Design flux | 40-150L/m2/h | 40-150L/m2/h | 40-150L/m2/h | 40-150L/m2/h | 40-150L/m2/h |
Operating mode | Cross flow or dead-end flow | Cross flow or dead-end flow | Cross flow or dead-end flow | Cross flow or dead-end flow | Cross flow or dead-end flow |
Bacteria removal rate | >4log | >4log | >6log | >6log | >6log |
Permeate turbidity | <0.1NTU | <0.1NTU | <0.1NTU | <0.1NTU | <0.1NTU |
Operating temperature | 5~40ºC | 5~40ºC | 5~40ºC | 5~40ºC | 5~40ºC |
PH range | 2~10 | 2~10 | 2~10 | 2~10 | 2~10 |
Operating temperatureFROTEC ULTRA FILTRATION MEMBRANE 2860 2880 UF2860 UF 2880 are an Ultra Filtration membrane module made by PVDF material hollow fiber tubes, and cover is PVC shell. These UF membranes are characterized by Antibacterial function.(especially good for removing particulate, virus, colloid, albumin protein, gelatin, carbon black, organic compound.......)
UF2880
| Filtration Type | Outside-In |
Max. Working Pressure (@ 20ºC) | 94 psi (0.62MPa / 6.25bar) |
Suggested Working Pressure | 43 psi (0.3MPa / 3bar) |
Backwash pressure(suggested) | 36 psi (0.25Mpa /2.5bar ) |
Air Flush Rate(Duration 2~4mins)(suggested) | 7~9 acfm (12~15m3/h) |
Max. Trans-Membrane Pressure Drop(TMP) | 30 psi (0.2MPa / 2bar) |
Feed Water Temperature | 1~40ºC |
Active Membrane Area | 77 m2(829ft2) |
Filtrate Water Flow Range | 13~40 GPM (3~9M3PH) |
Molecular Weight Cut-Off /MWCO/(average porosity/pore Ø) | 100,000 Dalton (0.01µm~0.1 µm) |
Hollow Fiber Tubes In/Out Diameter | 0.6/1.2mm |
pH Range of Feed Water During Continuous Operation | 2~11 |
Operation Mode | Cross flow/Dead-end flow |
Max Feed Water Turbidity | < 300 NTU |
Product Water Turbidity | <0. 1 NTU |
Feed Water Particle size (max.) | < 300 µ |
Feed Water SDI15 | < 25 |
Product Water SDI15 | < 2.5 |
Product water average flow in system(Suggested) | Approximately 3M3PH |
UUF2860 | Filtration Type | Outside-In |
Max. Working Pressure (@ 20ºC) | 94 psi (0.62MPa / 6.25bar) |
Suggested Working Pressure | 43 psi (0.3MPa / 3bar) |
Backwash pressure(suggested) | 36 psi (0.25Mpa /2.5bar ) |
Air Flush Rate(Duration 2~4mins)(suggested) | 7~9 acfm (12~15m3/h) |
Max. Trans-Membrane Pressure Drop(TMP) | 30 psi (0.2MPa / 2bar) |
Feed Water Temperature | 1~40ºC |
Active Membrane Area | 55 m2(592ft2) |
Filtrate Water Flow Range | 9~27 GPM (2~6M3PH) |
Molecular Weight Cut-Off /MWCO/(average porosity/pore Ø) | 100,000 Dalton (0.01µm~0.1 µm) |
Hollow Fiber Tubes In/Out Diameter | 0.6/1.2mm |
pH Range of Feed Water During Continuous Operation | 2~11 |
Operation Mode | Cross flow/Dead-end flow |
Max Feed Water Turbidity | < 300 NTU |
Product Water Turbidity | <0. 1 NTU |
Feed Water Particle size (max.) | < 300 µ |
Feed Water SDI15 | < 25 |
Product Water SDI15 | < 2.5 |
Product water average flow in system(Suggested) | Approximately 2.5M3PH |
MODEL | L | L1 | L2 | L3 | D | In/out Ø |
UF2860 | 1860 mm (73'')
| 1500 mm (59'') | 1630mm (64'') | 1820 mm (72'') | 225mm (9'') | DN50 mm (2'') |
UF2880 | 2360 mm (93'')
| 2000 mm (79'') | 2130mm (84'') | 2320 mm (91'') | 225mm (9'') | DN50 mm (2'') |
Address:
Building 2, 48 Changsha Road, Dalong Street, Panyu District, Guangzhou, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Company Introduction:
FROTEC is a professional manufacturer of filtration products, focusing on environmental protection. With advanced production equipment, quality control instruments and technology, FROTEC designs and manufactures filtration products in liquid and gas & air, such as membrane pressure vessel, FRP tank, UF membrane, filter cartridge, filter housing and etc. Our products are applied to bio-pharmaceutical, medical, food & beverage, microelectronic, chemistry, electronics, water treatment and laboratory application. With many years′ experience in filtration, our products are best introduced by our partners in many countries and areas, like the USA, Africa, Europe, Southeast Asia, South America etc. We aim at working together with our partners to protect our environment. We will continue to carry forward the quality-first, pioneering and innovative spirit to manufacture and supply products with superior quality.