Manufacturer EDI Module for Water Treatment

• Customization: Available
• Certification: ISO9001
• Salt Rejection Rate: as Required
• Application: Industry
• Capacity: as Required
• Transport Package: Wooden
• Specification: as required
• Trademark: Frotec
• Origin: China

Product Description

EDI(Electrodization) is a membrane separation technology which combines electrodialysis and ion exchange technology, including anion exchange membrane and ion exchange membrane.Switching resin and DC power supply lamp equipment to realize water under the action of electric field through the selection of ion exchange membrane and resin exchange of ions Directional migration of ions to remove salt in water depth and to exchange ion exchange resin for two consecutive years through H and OH produced by water electrolysis.Production of Super pure water up to 15-18.2 Omega cm.

ITEM The amount of water produced	KLX-50	KLX-100	KLX-200	KLX-300	KLX-500
Water production flow range(m3/h)	0.5-0.7	0.7-1.2	1.5-2.5	2.0-3.5	3.5-5.5
Standard water flowjnf/h)	0.5	1	2	3	5
Hydropower resistance(MQ • cm)	>15	>15	>15	>15	>15
Silicon boron removal rate(%)	N99	N99	N99	>99	>99

 

Inflow requirements |	KLX-50	KLX-100	KLX-200	KLX-300	KLX-500
Temperature range (*C)	15-35 (25 optimal)	15-35 (25 optimal)	15-35 (25 optimal)	15-35 (25 optimal)	15-35 (25 optimal)
Inflow PH	6.5-9.0	6.5-9.0	6.5-9.0	6.5-9.0	6.5-9.0
Electric conductivity (p S/cm)	1-25 (optimal<5)	1-25 (optimal<5)	1-25 (optimal<5)	1-25 (optimal<5)	1 -25 (optimal<5)
Total carbon dioxide (ppm)	<3 (optimal<2)	<3 (optimal<2)	<3 (optimal<2)	<3 (optimal<2)	<3 (optimal<2)
Total hardness (ppm)	<1	<1	<1	<1	<1
Siliconactive silica (ppm)	WO.5 (optimalw0.2	WO.5 (optimal^0.2)	WO.5 (optimalw0.2)	<0.5 (optimal<0.2)	WO.5 (optimalw0.2)
Total organic carbon (ppm)	W0.5	W0.5	W0.5	W0.5	W0.5
Residual chlorine (ppm)	W0.05	W0.05	W0.05	W0.05	W0.05
Metal ion (Fe/Mn.ppm)	W0.01	W0.01	W0.01	W0.01	W0.01
Turbidity (NTU)	<1	<1	<1	<1	<1
Lipid	Not detected	Not detected	Not detected	Not detected	Not detected
PM (um)	W1.0 (optimal w0.5)	w 1.0 (optimal w 0.5)	w1.0 (optimalw0.5)	w1.0 (optimalw0.5)	w1.0 (optimalw0.5)
Oxidant	Not detected	Not detected	Not detected	Not detected	Not detected

 

Operating parameters	KLX-50	KLX-100	KLX-200	KLX-300	KLX-500
Fresh water output pressure (Din, bar)	1-5	1-5	1-5	1-5	1-5
Fresh water intake pressure (Cin, bar)	0.5-1.0 lower than Din	0.5-1.0 lower than Din	0.5-1.0 lower than Din	0.5-1.0 lower than Din	0.5-1.0 lower than Din
Fresh water output pressure (Dout, bar)	0.5-2	0.5-2	0.5-2	0.5-2	0.5-2
Concentrated water output pressure (Gout, bar)	0.5-1 .Glower than Dout	0.5-1.0 lower than Dout	0.5-1.0 lower than Dout	0.5-1.0 lower than Dout	0.5-1.0 lower than Dout
Working voltage (VDC)	10-50	30-80	50-100	60-120	80-160
Running current (A)	2-5	2-5	2-5	2-5	2-5
Recovery rate (%)	85-95	85-95	85-95	85-95	85-95