Industrial 4040-Ulp 8040-Ulp Water RO Reverse Osmosis Membranes

• Customization: Available
• Membrane Type: Tubular
• Type: RO
• Model NO.: FROTEC-ULP4040, 8040
• Transport Package: in Carton & Pallets
• Specification: 4040, 8040
• Trademark: FROTEC
• Origin: Guangzhou
• HS Code: 8421219990
• Production Capacity: 50000PCS/Year

Product Description

FROTEC ULP-8040 / ULP-4040 low pressure membrane

FROTEC ULP-8040 / ULP-4040 elements can produce high-quality water at low operating costs. They are ideal for use in large-scale industrial and municipal water treatment systems.

FROTEC ULP-8040 / ULP-4040 elements can lower the operating pressure by 40%.
 

Suitable for:

new-built or existing RO systems.
municipal and industrial water demineralization system.
various operating conditions with 4″and 8″elements.

Product Specifications
 

Model	Active Membrane Area ft2(m2)	Stabilized Salt Rejection %	Minimum Salt Rejection %	Permeate Flow Rate gpd(m3/d)
ULP-8040	400(37)	99.3	99.0	11,500(44)
ULP-4040	78(7.2)	99.3	99.0	2250(8.7)

Test Condition: Feed Water Pressure 1.03MPa (150 psi); Feed Water Temperature 25 °C (77 °F); Feed Water Concentration 2,000 ppm NaCl; Feed Water pH 7; Permeate Recovery 15%.
 

Dimensions:

 

Model	A inch(mm)	B inch(mm)	C inch(mm)	D inch(mm)
ULP-8040	40(1,016)	0	1.125(29)	7.9(201)
ULP-4040	40(1,016)	1.05(26.7)	0.75(19)	3.9(99)

Operation    Condition
Maximum Operating Pressure                                         41 bar(600 psi) Maximum Operating Temperature                                 45ºC(113ºF)
Maximum Pressure Drop per Element      1.0 bar (15 psi)
pH Range, Continuous Operation                                                            2-11 pH Range, Chemical Cleaning                                                       1-13
Maximum Feed Silt Density Index (SDI15)                       5.0 Free Chlorine Tolerance < 0.1 ppm
 

Note

1. Permeate flow rates for individual elements may vary ±15%.
2. Membrane active areas may vary ±4%.
3. Stabilized salt rejection is generally achieved after continuous using for 24-48 hours, which depending on feed water qualities and operating conditions.